Wire-In Phase Coupler
Installation of a Phase Coupler (Wire-In, Breaker or Plug-In) guarantees that UPB signals sent by the Controller will reach every Receiver in the project area. The Wire-In Phase Coupler fits into a single gang box and is wired directly into a double breaker, or any two vertically consecutive breakers, preferably in the main electrical panel of the project.
It is HIGHLY RECOMMENDED that a Phase Coupler (Wire-In, Breaker or Plug-In) is installed in each ControlSCAPE controlled environment.
For additional information on the use and function of the Phase Coupler please read the System Design page of this web site.
|Mounting||Standard J Box|
|Input Power||120 VAC 60+3Hz|
|Operating Temperature||30 to 120 (F)|