|600 Watt Dimmer Switch
This is a 600 watt UPB Switch/Dimmer Receiver made specifically to handle incandescent, florescent, and magnetic low voltage loads. It can be used as either an ON/OFF only device or a Dimmer depending on the settings assigned to the Switch/Dimmer during setup of the ControlSCAPE Controller.
Dimmer/Switch Receivers can control loads directly (such as replacing the switch on the front door coach lights) or indirectly (such as switching an outlet that has a transformer plugged into it). Each Dimmer/Switch is dimmable or can be used in an On/Off only mode.
|Load Type||Incandescent / Florescent / Mag Low Voltage|
|Settings||Dimming or Non-Dimming|
|Max Total Load||600W / 600VA|
|Current Maximum Non-Dimming||5A|
|Dimensions||4.3 x 1.7 x 1.9 (in)|
|Mounting||Standard J box|
|Input Power||120 + 12 VAC|
|Input Frequency||60 + .3 Hz|
|Operating Temp||-40 to 104 F|
|Colors Available||White / Almond / Ivory / Black / Brown|
|Device Maximum Load||No Fins Removed Deep Box||No Fins Removed Normal Depth Box||One Fin Removed Next to One Dimmer||Both Fins Removed Next to Two Dimmers|