|2400 Watt Switch
This is a 2400 watt UPB Switch/Dimmer Receiver made specifically to handle incandescent, florescent, and magnetic low voltage loads. It can be used as either an ON/OFF only device or a Dimmer depending on the settings assigned to the Switch/Dimmer during setup of the ControlSCAPE Controller.
Note: While this Switch does fit into a single gang box it has unusually large heat sink “fins” that protrude beyond the face of the electrical box. The Switch does come with its own face plate due to the unconventional shape of the overall unit.
|Load Type||Incandescent / Florescent / Mag Low Voltage|
|Settings||Dimming or Non-Dimming|
|Max Total Load||2400W / 2400VA|
|Current Maximum Non-Dimming||20A|
|Dimensions||4.68 x 4.5 x 1.25 (in)|
|Mounting||Standard J box|
|Input Power||120 + 12 VAC|
|Input Frequency||60 + .3 Hz|
|Operating Temp||-40 to 104 F|
|Colors Available||White / Almond / Ivory / Black / Brown|
|Device Maximum Load (LCP)||No Fins Removed Large Box (greater than 90 CU IN)||No Fins Removed Normal Depth Box||One Fin Removed Next to One Dimmer||Both Fins Removed Next to Two Dimmers|