Breaker Phase Coupler
Installation of a Phase Coupler (Wire-In, Breaker or Plug-In) guarantees that UPB signals sent by the Controller will reach every Receiver in the project area.
The Breaker Phase Coupler is designed to snap into a Cutler-Hammer, Square-D, Murray or GE residential load center in a tandem breaker position.
It is HIGHLY RECOMMENDED that a Phase Coupler (Wire-In, Breaker or Plug-In) is installed in each ControlSCAPE controlled environment.
For additional information on the use and function of the Phase Coupler please read the System Design page of this web site.
|Mounting||Cutler Hammer, Square-D, Murray or GE|
|Input Power||120 VAC 60+3Hz|
|Operating Temperature||30 to 120 (F)|